Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa

PDF
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 1 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 2 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 3 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 4 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 5 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 6 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 7 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 8 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 9 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 10 - Agronetto
Zainteresovani ste za oglas?
1/10
PDF
Cena:
na upit
Zatražite cenu
Kontaktirajte prodavca
Lokacija: Ukrajina m.Dnipro8446 km to "United States/Columbus"
Kataloški broj prodavca: 10539
Datum objavljivanja: više od 1 meseca
Opis
Širina hvatanja: 6,5 m
Stanje
Stanje: novi
Dodatne usluge

Dodatne informacije — Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa

In the presence of units with different working widths: 2.6 m, 3.9 m, 5.2 m, 6.5 m, 7.8 m, 9.1 m, 10.4 m, 11.7 m, 18.2 m.
Designed for various types of autumn-spring field work:


field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.


Advantages and design features of the Green Wave Euro vertical tillage turbo cultivator with a working width of 6.5 m:


it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.


Basic equipment:


turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.


Additional equipment:


tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).


Specifications:

Type ... trailed
Tractor hitch ... pendulum
Average speed, km / h ... 15
Working width, m ... 6.5
Working length, m ... 8
Length during transportation, m ... 8
Height during transportation, m ... 3.9
Width during transportation, m ... 2.95
Total weight, t ... 6.85
Number of spring blocks, pcs … 20
Number of turbo disks, pcs ... 40
The distance between the turbo disks, m ... 0.162
Depth of processing, mm ... 0-180
Depth adjustment ... set of clips 50/30/19/10 / 7mm on the rods of hydraulic cylinders
Tire Sizes:
The support wheels of the wing frames ... 10.0 / 75-15.3 (14PR)
The support wheels of the frames of the central frame ... 19.0 / 45-17 (18PR)
Tire pressure, bar ... 4-5
Hydraulic system pressure, bar ... 180
Minimum tractor power, hp ... 280
When deep processing is recommended, hp ... 330
The number of staff, people ... 1
field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.
turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.
tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).
Prikaži ceo komentar
Važno
Ova ponuda је informativnog karaktera. Za više detalja, pitajte prodavca.
Saveti za kupovinu
Saveti za bezbednost
Provera prodavca

Ako odlučite da kupite opremu po niskoj ceni, proverite da li komunicirate sa pravim prodavcem. Saznajte više o vlasniku opreme. Jedan od načina prevare je da se predstavi kao prava kompanija. U slučaju sumnje, obavestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.

Provera cena

Pre nego što odlučite da napravite kupovinu, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumeli prosečnu vrednost izabranog modela opreme. Ako je cena ponude koja vam se sviđa mnogo niža od sličnih ponuda, razmotrite je. Značajna razlika u ceni može ukazati na skrivene nedostatke ili pokušaj prodavca da izvrši prevaru.

Ne kupujte proizvode čija je cena suviše različita od prosečne cene slične opreme.

Ne dajte saglasnost na sumnjive zaloge i plaćanje robe unapred. U slučaju sumnje, ne bojte se da pojasnite detalje, tražite dodatne fotografije i dokumente za opremu, proverite autentičnost dokumenata i postavjate pitanja.

Sumnjivo plaćanje unapred

Najčešća vrsta prevare. Nepošteni prodavci mogu zatražiti određenu količinu kapare da "rezervišu" vaše pravo na kupovinu opreme. Dakle, prevaranti mogu sakupiti veliki iznos i nestanu, i više se ne pojave.

Varijante takve prevare mogu uključivati:
  • Prenos pretplate na karticu
  • Nemojte plaćati unapred bez izdavanja dokumenata koji potvrđuju postupak prenosa novca, ako je vam tokom komunikacije prodavac postao sumnjičav.
  • Prenos na račun "poverenika"
  • Takav zahtev treba biti alarmantan, najverovatnije komunicirate sa prevarantom.
  • Prenos na račun kompanije sa sličnim nazivom
  • Budite oprezni, prevaranti se mogu sakriti iza poznatih kompanija, neznatno menjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv kompanije sumnjiv.
  • Zamena sopstvenih podataka u fakturi stvarne kompanije
  • Pre prenosa proverite da li su navedeni podaci tačni i da se odnose na navedenu kompaniju.
Pronašli ste prevaranta?
Javite nam
Saveti za bezbednost
PDF
Prodajete tehniku?
Učinite to sa nama!
Slični oglasi
Cena na upit
Širina hvatanja 6,5 m Dubina obrade 180 mm Potrebna snaga traktora 280 k.s.
Ukrajina, m.Dnipro
Kontaktirajte prodavca
novi Disk-share harrow 4.2 m kultivator za strništa novi Disk-share harrow 4.2 m kultivator za strništa
2
Cena na upit
Širina hvatanja 4,2 m Dubina obrade 400 mm Potrebna snaga traktora 280 k.s. Radna brzina 15 km/h
Ukrajina, m.Dnipro
Kontaktirajte prodavca
novi Spring teeth and cables 3M, 2секции under tilling machines kultivator za strništa novi Spring teeth and cables 3M, 2секции under tilling machines kultivator za strništa novi Spring teeth and cables 3M, 2секции under tilling machines kultivator za strništa
3
193,80 € 9.033 UAH ≈ 22.730 RSD
Širina hvatanja 3 m
Ukrajina, m.Dnipro
Kontaktirajte prodavca
35.000 US$ ≈ 31.140 € ≈ 3.651.000 RSD
2006
Ukrajina, Farbovane
Kontaktirajte prodavca
25.000 US$ ≈ 22.240 € ≈ 2.608.000 RSD
Širina hvatanja 11,7 m Dubina obrade 127 mm Potrebna snaga traktora 350 k.s. Radna brzina 8 km/h
Ukrajina
Kontaktirajte prodavca
11.650 € ≈ 1.366.000 RSD
2019
Širina hvatanja 3 m Dubina obrade 250 mm Potrebna snaga traktora 130 k.s.
Ukrajina, Shumskoy r-n, s. V.Dederkaly
Kontaktirajte prodavca
Lemken KOMPAKTOR kultivator za strništa Lemken KOMPAKTOR kultivator za strništa
2
12.000 € ≈ 1.407.000 RSD
2006
Širina hvatanja 6 m
Ukrajina, Kyiv
Kontaktirajte prodavca
5.600 US$ ≈ 4.982 € ≈ 584.100 RSD
2020
Širina hvatanja 3 m Dubina obrade 120 mm Potrebna snaga traktora 90 k.s.
Ukrajina
Kontaktirajte prodavca
Cena na upit
2024
Širina hvatanja 5 m Dubina obrade 250 mm Potrebna snaga traktora 170 k.s.
Ukrajina, Shumskoy r-n, s. V.Dederkaly
Kontaktirajte prodavca
Cena na upit
2012
Širina hvatanja 13,5 m
Ukrajina, Zolochiv
Kontaktirajte prodavca
15.300 € ≈ 1.794.000 RSD
2025
Širina hvatanja 3 m Dubina obrade 250 mm Potrebna snaga traktora 140 k.s.
Ukrajina, Lutsk
Kontaktirajte prodavca
12.000 US$ ≈ 10.680 € ≈ 1.252.000 RSD
2004
Širina hvatanja 6,5 m
Ukrajina
Kontaktirajte prodavca
9.200 € ≈ 1.079.000 RSD
2025
Širina hvatanja 3 m Dubina obrade 300 mm Potrebna snaga traktora 150 k.s.
Ukrajina, Lutsk
Kontaktirajte prodavca
1 € ≈ 117 RSD
Širina hvatanja 6 m Dubina obrade 300 mm Potrebna snaga traktora 240 k.s.
Ukrajina, Mironovka
Kontaktirajte prodavca
Cena na upit
2025
Dubina obrade 250 mm
Ukrajina, Lutsk
Kontaktirajte prodavca
19.800 € ≈ 2.322.000 RSD
2022
Širina hvatanja 3 m Potrebna snaga traktora 200 k.s.
Ukrajina, Lutsk
Kontaktirajte prodavca
14.000 US$ ≈ 12.450 € ≈ 1.460.000 RSD
Širina hvatanja 4,8 m
Ukrajina
Kontaktirajte prodavca
19.000 US$ ≈ 16.900 € ≈ 1.982.000 RSD
2008
Širina hvatanja 5 m Dubina obrade 350 mm
Ukrajina, Ohinki
Kontaktirajte prodavca